Registered: 1 week, 2 days ago
Floor Protection - A Product Guide
Your floors need particular protection when undergoing remodeling, during new building, moving heavy furniture or equipment, and for different occasions beyond day-to-day use. Protecting flooring makes sense and saves money. A spill of paint, the drop of a hammer, a scratch from heavy furniture can value hundreds of dollars in replacement and repair costs. This article describes surface protection products for floors so as to make informed decisions on the best product to use to your needs.
Types of Protection Packaging:
Floor protection products are commonly packaged as either:
(1) Products by the roll: These embrace common adhesive films, rolled paper products and rolled textile protection. Protective materials purchased by the roll are commonly measured in thickness by mils (e.g., 2.5 mils thick up to forty eight mils thick).
(2) Products by the sheet: These include corrugated plastic, masonite, and different inflexible protection. Protective materials purchased by the sheet are commonly measured in thickness by the inch (e.g., 1/4-inch thick) and usually come as 4 toes by eight feet.
Type of Flooring Protection:
Paper protection is suitable for all hard surfaces and resilient surfaces however does not work well to protect carpets as it can tear when flexing under footsteps. Paper products are breathable in order that glue fumes and cement curing vapors can escape. One disadvantage to paper products as they require tapes to safe them to flooring and tapes can typically depart adhesive residue when removed. Common paper protection products include:
· Ramboard™ A coated compressed paper board 38 mils thick that's breathable, waterproof and made from recycled paper.
· Kraft paper is a lightweight brown paper that's inexpensive however does not afford any impact protection and may easily tear
· Scrim paper may incorporate coatings or reinforcements to make them water-resistant as well as scrim threads to reinforce the paper and stop tearing. These improved papers are longer lasting than regular Kraft paper or rosin paper nonetheless they're additionally too thin to supply a lot impact protection.
· Rosin paper is thicker than Kraft paper and is very low cost. Rosin paper is recycled, felt paper that ranges from 9.zero to 11.5 mils thick. The large drawback of using Rosin paper is that it might cause a everlasting stain if the paper gets wet. Rosin paper can even rip simply so it not normally beneficial for use
· Corrugated cardboard rolls or sheets will also be used to protect flooring. Corrugate provides impact protection nonetheless it just isn't coated with a water-proof finish and should be kept dry at all times in order that it does not disintegrate. Cardboard products are additionally available as single-, double-, and triple-walled corrugated cardboard sheets or as a fan-folded stack.
Polyethylene (PE) films are sold as self adhesive rolled films varying from 2.zero as much as 3.5 mils in thickness. They trap any moisture from escaping so they shouldn't be used on any floors which are curing. Two of the good benefits of polyethylene films are that films will flex and contour so they can be used on carpets as well as hard surfaces. These films do not supply any impact protection and are usually rated for short time period use of 30 to 90 days only. Polyethylene films are designed for one-time use and don't use recycled materials making them a poor choice in sustainable protection. Protection films are available in quite a lot of adhesion "tack". Hard surface protection films could have a lower tack and shade than carpet protection which needs a more aggressive glue to hold onto carpet fibers successfully.
Plywood and Masonite are commonly used as protection on commercial projects with lots of foot traffic. Masonite is a wood product made from wood fibers unlike plywood which is an actual sheet of thin wood. Each plywood and Masonite are sold in the standard size of 4 toes by eight feet and are more expensive per square foot than paper or polyethylene products. Masonite is commonly 1/8 or 1/four inch thick. Plywood is commonly 1/four inch to 3/four inch thick. Both products provide impact protection on quite a lot of floor types and provide adequate protection in opposition to heavy equipment use or furniture moving. Both plywood and Masonite are breathable and reusable nonetheless they are bulky to carry and store. These wood sheets needs to be used on high of a softer protection such as a rolled textile as they simply scratch flooring. These sheets work well to protect carpet as they forestall wrinkles when rolling heavy loads over the carpet. Plywood and Masonite do not supply moisture protection and will be harder to chop to size than different protection types.
Here is more information on correx check out the page.
Topics Started: 0
Replies Created: 0
Forum Role: Participant